BERG 400 8S MECHANISM FOR CONSOLE DOORS AND HOF 800 SET FOR DOORS UP TO 400 kg.

BERG 400 8S MECHANISM FOR CONSOLE DOORS AND HOF 800 SET FOR DOORS UP TO 400 kg.

BERG 400 8S is designed for sliding doors weighing up to 400 kg. The rail is galvanized and 6 meters long. The set includes two 8-wheel trolleys, a stop, a galvanized rail, a guide wheel with a bracket, a holder with two locks, and a steel end cap.

• Galvanized rail – 1 pc., dimensions 70x60x3.5 mm, length 6 m
• Trolleys – 2 pcs., with eight wheels, galvanized
• Guide wheel – 1 pc., galvanized
• Stop – 1 pc., galvanized
• End cap – 1 pc., galvanized
• Holder with two locks – 1 pc., galvanized

Sliding console doors slide entirely in the air, without being supported by an upper or lower rail. This system is suitable for areas with dirt or snow accumulation, as it does not require cleaning.

HOF 800 set is an automatic door system for doors weighing up to 800 kg and a linear size of up to 8 meters. It features a compact design and includes a built-in control panel, magnetic limit switches, and a locking mechanism for manual release in emergency situations.

• Automatic stop upon impact with an obstacle during opening
• Automatic reversing upon impact with an obstacle during closing
• Power supply: 220V, 50Hz; 110V, 60Hz
• Motor power: 380W
• Maximum door weight: 800 kg
• Door movement speed: 11–13 m/min
• Limit switch: magnetic
• Remote control range: about 50 m
• Ability to work with up to 20 remote controls
• Remote operating frequency: 433.92 MHz
• Operating mode: S2 15 minutes
• Noise level: ≤58 dB
• Operating temperature: from -20 °C to 70 °C
• Gross weight: 10.200 kg

The warranty for the set is 2 years.

Description of the HOF 800 set:

• Motor with automation
• Six meters of toothed racks
• Unlocking key set – 2 pcs.
• Remote control – 2 pcs.
• Installation accessories
• Metal mounting plate
• User manual